I am using the "arduino-led-onoff-ble" template to write to HM10 and activate a LED (on/off).
Now, I'd like to read a status which is pushed by the arduino each time I issue "on"
Is there any example that can help?
Reading from Arduino connected to HM10
Re: Reading from Arduino connected to HM10
Hello, here is experimental code for reading/writing Arduino over BLE:
https://github.com/divineprog/evo-demos ... ptable-ble
Is this of any help?
Best, Mikael
https://github.com/divineprog/evo-demos ... ptable-ble
Is this of any help?
Best, Mikael
Re: Reading from Arduino connected to HM10
Hi Mikael
Thanks for your answer and for your example.
The code there is not for HM10, so I modified it accordingly.
It can connect now to my Arduino/HM10.
But I couldn't read any data that the arduino is transmitting in a loop
Where should it be displayed? Is there a specific example for HM10 around?
Thanks,
Avi
Thanks for your answer and for your example.
The code there is not for HM10, so I modified it accordingly.
It can connect now to my Arduino/HM10.
But I couldn't read any data that the arduino is transmitting in a loop
Where should it be displayed? Is there a specific example for HM10 around?
Thanks,
Avi
Re: Reading from Arduino connected to HM10
It should work. Find wiring at Apploader site: http://www.apploader.info. You can also try with Apploader app for the beginning.
Re: Reading from Arduino connected to HM10
Hi!
I know this is quite an old topic but does anyone already manage to write and read data on a HM-10 with Arduino and Evothings solution on Android?
I tried quite a lot of configurations but didn't manage to make it works
Does anybody have a kind of simple terminal example that works with HM-10?
My purpose is to be able to send strings like "TOTO" and receive the response like "HI TOTO".
On the Arduino side it's okay. I receive and send data with serial.write and serial.read and with an app like HMBLE Terminal it works great.
Thanks in advance for your help!
I know this is quite an old topic but does anyone already manage to write and read data on a HM-10 with Arduino and Evothings solution on Android?
I tried quite a lot of configurations but didn't manage to make it works
Does anybody have a kind of simple terminal example that works with HM-10?
My purpose is to be able to send strings like "TOTO" and receive the response like "HI TOTO".
On the Arduino side it's okay. I receive and send data with serial.write and serial.read and with an app like HMBLE Terminal it works great.
Thanks in advance for your help!
-
- Posts: 6
- Joined: 05:01, 23 Feb 2015
Re: Reading from Arduino connected to HM10
Hello
I looking for working example for read data from HM-10 module ?
I try many way and i never receive data in my HTML files ?
I know my module work i have test with terminal in my android phone , and i receive the data
Thanks for your help
Alain Tanguay
I looking for working example for read data from HM-10 module ?
I try many way and i never receive data in my HTML files ?
I know my module work i have test with terminal in my android phone , and i receive the data
Thanks for your help
Alain Tanguay
Return to “Questions and answers”
Who is online
Users browsing this forum: No registered users and 12 guests